Free shipping from 70€ within Germany & 150€ worldwide. Tuning for private property only. Products are not covered by § 22a StVZO.

SpeedBox 3.0 for Yamaha

Tax included. Shipping calculated at checkout.

Activation of the chip by pressing a button:
LIGHT - key/ ↑↓↑↓ / + - + -
Maximum speed: unlimited
Speed ​​limit: yes
Display: real values
Compatible with engines:
Not compatible with:
Yamaha UrbanRush
Yamaha PW-X3
Cross Connect
YDX Torc
YDX Moro
YDX Moro Pro
SpeedBox App
If you update the software of your e-bike, first uninstall the SpeedBox from the e-bike, update the software, reinstall the SpeedBox in the e-bike.

3rd generation smart chip with the ability to set the speed limit of the e-bike.

With the SpeedBox 3.0 tuning chip, you can freely set the speed limiter of the e-bike. After installing the chip, real data such as top speed, average speed, daily distance and range will be shown on the e-bike display.

How does SpeedBox 3.0 work?

You activate the SpeedBox 3.0 chip on the e-bike display. After pressing the LIGHT button or ↑↓↑↓, the display briefly shows 99 km/h. From this moment you can drive at unlimited speeds without limits. Press the LIGHT button again to cancel the chip function. The display shows 25 km/h and the speed limit of 25 km/h is switched on again. The pedelec then works as it did before the chip was installed.

To set the maximum speed by switching the mode down three levels and then up three levels. The current speed limit is then displayed. To change the maximum speed, briefly press the LIGHT button or rotate the rear wheel 360°. The last displayed limit is saved after five seconds of inactivity.


To connect the SpeedBox chip to an e-bike we use colored connectors equipped with a key for correct connection, so installing the chip is really easy. We have written detailed instructions and made videos that any customer can use to install the SpeedBox. Removing the tuning chip is as easy as installing it. If you have some connection problems, please don't hesitate to contact us.

If you want to install a SpeedBox on a brand new bike, you need to ride that bike at least 1km before you start the chip for the first time.

Detailed installation information can be found here.


Please note that operating pedelecs modified in this way on the road may conflict with the laws in force in some countries. The manufacturer assumes no responsibility for damage resulting from the use of SpeedBox products. E-bikes equipped with SpeedBox products may not be used on roads, cycle paths and public areas. E-bikes equipped with SpeedBox products may only be used at your own risk and under your own ownership. Using SpeedBox products may void your e-bike warranty.

We recommend the use of additional safety features and protective products to avoid injury.