E-scooter tuning chip for Ninebot G30D, G30, G30LD & G30D II + app connection
This tuning chip removes the speed limit of the e-scooter so that it drives between 28 km/h and 33 km/h. Installation is very easy and only takes 5 minutes.
The chip was developed exclusively for the Ninebot models of the G series (G30D, G30, G30LD & G30D II (2nd generation)). Before purchasing, please check the software version of the scooter. This must not be higher than v1.7.0. be - v1.7.13. and higher/newer no longer works!
This chip has an additional app connection. This is a separate web app, which is called up by connecting a smartphone (Android, iOS, Huawei) or PC (Windows, Linux, Mac OS) to the WLAN network of the e-scooter tuning chip. Compared to the normal Ninebot tuning chip without an app connection, we have the following functions:
- Lock E Scooter
- View remaining range
- Use original Ninebot app
- Set a key combination to activate the tuning activation (e.g. instead of clicking 8x, only click 4x or click 11x can be selected)
After connecting the tuning chip, the e-scooter can be used normally and initially only drives at its "legal" 20 km/h. The tuning only becomes active after 8x clicks on the power button. Depending on the load (driver's weight), the e-scooter then reaches a speed of between 28-33 km/h. If you switch off the e-scooter, the tuning is deactivated - the next time you drive, you have to press the on button 8 times again. In this way, you can easily control when the e-scooter's throttling is active and when it is lifted.
- Easy installation: The enclosed instructions explain the installation step by step. The installation is very easy and done in 5 minutes.
- Easy to use: After the simple installation, the speed limit can be easily canceled before each journey by pressing the button on the speedometer 8 times. After switching off, the e-scooter drives again at 20 km/h until the tuning is activated again.
- Simply inconspicuous: You can remove the tuning chip just as quickly and easily as you installed it. The chip is not visible from the outside because it is hidden in the handlebar.