for the new sensor (2nd picture) you need the badassBox 4 Panasonic 2020 , for the normal Panasonic sensor (3rd image) you need it badassBox 4 Panasonic.
The badassBox 4 Panasonic CS set includes all the parts you need to mount the badassBox 4 on your e-bike with a Panasonic mid-motor and pen-shaped CS sensor:
- badass box 4
- CS adapter
- Spoke magnet with thumb screw
With the badassBox 4 Panasonic CS set, you not only have all the parts you need to tune your bike with one click, you also save money at the same time.
installation
The pin-shaped CS sensor is located in the dropout area.
To get to the sensor you have to remove the rear wheel.
Loosen the screws on the bracket that attaches the sensor to the dropout.
Separate the sensor from the bracket.
Slide the pen-shaped sensor into the adapter so that the flat side of the sensor aligns with the corresponding recess in the adapter. The sensor must be pushed fully into the adapter so that only the cable is protruding and the snap lock is flush with the surface of the adapter. (In the photo, the sensor is not fully inserted.)
Fasten the adapter to the frame of your bike with the supplied cable ties.
Reinstall the rear wheel of your bike.
Slide the badassBox onto the adapter until it clicks into place.
Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!
