If the sensor integrated in the dropout has the shape of the sensor in the second picture, then you need this badassBox 4 Bosch X-Set If the Bosch sensor (second picture) is easily accessible on your chainstay, you only need one badassBox 4 Bosch .
Badass eBikes proudly presents: The new badassBox 4 Bosch G4 set
The badassBox 4 Bosch G4 set includes all the parts you need to mount the badassBox 4 on your Trek e-bike with a Bosch, Fazua or TQ mid-motor and a G4 speed sensor integrated in the dropout:
With the badassBox 4 Bosch G4 set, you not only have all the parts you need to tune your bike with one click, you also save money at the same time.
installation
The integrated G4 speed sensor is located in the dropout area.
To get to the sensor you have to remove the rear wheel.
The scope of delivery includes a lens flange screw (you need a 2.5 mm hex key [Allen] for this) with which you screw the G4 speed sensor to the G4 adapter (1).
(2) A suitably tailored pad made of self-adhesive elastic foam is optionally included. This pad can be glued to the G4 adapter to attach it to the swingarm without risk of scratching.
With the included cable ties (3), the G4 adapter including the screwed-on G4 speed sensor is attached to a suitable point on the swingarm (4), where it is possible to slide the badassBox onto the adapter.
Reinstall the rear wheel and slide the badassBox onto the adapter until it clicks into place.
Mount the spoke magnet and align it with the edge of the badassBox housing. That's it. Have fun with your faster e-bike!
